Qlogic 8400 Series, Руководство пользователя

Страница: 97 / 391

7–Installing Management Applications
Detailed Procedures
67 83840-546-00 D
In Linux, the certificate should have the extension “.pem”. The extension
“.crt” and “.pem” are the same, so there is no need to use the
openssl
command to convert from .crt to .pem. You can simply copy the file as-is.
Install the Self-Signed Certificate on Windows Server
Transfer the file hostname .pfx you generated on the Windows server before you
install the certificate:
1. Click Start (or press the Windows logo key) and select Run .
2. Enter MMC and click OK .
3. Click File > Add/Remove Snap-in .
4. Click Add .
5. Select Certificates and click Add .
6. Select Computer account .
7. Click Next and then click Finish .
8. Click Close , then click OK .
9. Open the Certificates (Local Computer) folder and then open the
Personal folder.
10. Right-click Certificates , select All Tasks and then click Import .
11. Click Next to begin the Certificate Import Wizard.
12. Browse to select hostname.pfx .
13. When you are prompted for the password for the private key, enter the same
password you created in
“Generate a Self-Signed Certificate for
Windows/Linux Server” on page 64 .
14. Follow the instructions, select the defaults, and continue.
The certificate is shown as installed on the right side of the window. The
name will be the name you specified while creating a self-signed certificate.
NOTE
A separate certificate must be generated for an IPv4 address, IPv6 address,
and Hostname.