QLOCKTWO LARGE, Инструкция по эксплуатации

Страница: 4 / 11

7 6
Descriptions
Step by step setup
WARNING! The weight of QLOCKTWO LARGE is approx. 20 kg with a size of 900 x 900 x 35 mm.
Depending on the height, scaffolding or a lifting platform may be required. Please follow the instructions
on safety.
WARNING! Please ensure that the load-bearing capacity of the intended wall is sufficient for the
weight of the QLOCKTWO LARGE.
WARNING! Selecting the right wall plug is vital in order to securely mount to the wall.
The type of wall plug depends on the construction of the wall. Make sure the load-bearing capacity of the
intended wall and wall plugs is sufficient for the 20 kg weight of the QLOCKTWO LARGE.
1. Finding the right position
To determine the position of QLOCKTWO LARGE on the wall please use the enclosed template. Make sure
there are no pipes or other supply lines near the marked drill holes. Mark the position of the wall bracket
with the help of the template using a pencil or centre punch.
2. Drilling
Adjust the wall bracket with the spirit level and mark the drill holes through the wall bracket with a pencil or
screw. Drill the mounting hole at the marked points. Insert the wall plugs, appropriate to the construction of
the wall, into the drill holes.
3. Wall bracket
Mount the wall bracket with the 10 suitable screws, depending on the construction of the wall.
Abb. 1
A QLOCKTWO LARGE back
B 18 V socket
C Buttons for
manual setting
D Mains adapter
E Mains adapter with
F DC connector for 18 V socket and
G power supply cable (for 110 V to
230 V sockets)
H Wall bracket
I Cable conduit
J Cable hook (only to be used
with strain relief
M )
K Mounting rail
L Junction box
M Strain relief
(Velcro)
Infrared receiver