76
Disassembly:
1.
bottom of unit
2.
caster
3.
block
DESIGN NOTICE
In order to ensure the optimal performance of our products, the design specifications of
the unit are subject to change without prior notice.
POSITIONING THE UNIT
≥ 40cm
≥ 40cm
≥ 20cm
≥ 20cm
≥ 20cm
Casters(At four points on the bottom of unit)
•
Casters can move freely.
•
Do not force casters to move over carpet,
nor move the unit with water in the
bucket.
(The unit may tip over and spill water.)
•
A dehumidifier operating in a basement will have little or no effect in drying an
adjacent enclosed storage area, such as a closet, unless there is adequate circulation
of air in and out of the area.
•
Do not use outdoors.
•
This dehumidifer is intended for indoor residentialapplications only. This dehumidifer
should not be used for commercial or industrial applications.
•
Place the dehumidifier on a smooth, level floor strong enough to support the unit
with a full bucket of water.
•
Allow at least 20cm of air space on all sides of the unit for good air circulation (at
least 40cm of air space on air outlet).
•
Place the unit in an area where the temperature will not fall below 5 C(41 F). The coils
can become covered with frost at temperatures below 5 C(41 F), which may reduce
performance.
•
Place the unit away from the clothes dryer, heater or radiator.
•
Use the unit to prevent moisture damage anywhere books or valuables are stored.
•
Use the dehumidifier in a basement to help prevent moisture damage.
•
The dehumidifier must be operated in an enclosed area to be most effective.
•
Close all doors, windows and other outside openings to the room.
WHEN USING THE UNIT
•
When first using the dehumidifier, operate the unit continuously 24 hours. Make sure
the plastic cover on the continuous drain hose outlet install stightly properly so there
are no leaks.
4
