REMOTE CONTROL (FIGURE3)
1.
Install two “AAA”(not included) batteries as shown In FIGURE3.
2.
THE Remote Control Power button is labeled as such.
All the function performed with the Remote Control work identically to the Manual Controls.
1. A thermal overload protector is built in to prevent overheating.
2. When an overeater temperature is reached, the Heater will be automatically shut off .It can only resume peration
when the user resets the unit.
(See reset instruction below)
To Reset Heater:
1.
Unplug the Heater and wait 15-20 minutes for the unit to cool down.
2.
Then, turn on the unit again and operate normally.
MAINTENANCE
WARNING:
-
ALWAYS UNPLUG THE CORD BEFORE MOVING OR SERVICING.
-
DO NOT IMMERSE HEATER IN WATER!
CLEANING :
IMPORTANT! DO NOT IMMERSE HEATER IN WATER!
Clean the Heater grill with the vacuum brush attachment on your vacuum cleaner. This will remove lint and dirt
from the inside of the heater .DO NOT ATTEMPTS TO TAKE APART HEATER .DO NOT REMOVE GRILL.
Clean the body of the heater with a soft cloth.
CAUTION: Do not use gasoline benzine , thinner, harsh cleaners ,etc.as they will damage the Heater .NEVER use
ALCOHOL OR SOLVENTS
Service:
PVG Deutschland GmbH,
Telefon: +49 (0) 800 - 9427622
Fax: +49 (0) 180 - 5251450
STORAGE
: Store the Heater with these instructions in the original carton in a cool, dry place.
REMOTE CONTROL
SAFETY FEATURES
