29
The heater starts operating at maximum power. The display shows
. The heater will
continue operating at full power until the power is switched off manually or if the room
temperature exceeds 30ºC.
TEMPERATURE SETTING
OVERHEAT PROTECTION
This appliance has two levels of overheat protection:
1.
Automatic thermal cut-off
Switches off the heater in the event of overheating or malfunction and resets once the
temperature drops to a normal level
2.
Thermal fuse
In the event that the automatic thermal cut-off fails to operate, the heater has a further
safety device. This is a non-resettable switch which will require the unit be returned to an
approved service centre for replacement.
If overheating or malfunctions occur on a regular basis, return the heater to an approved service
centre for examination.
MAINTENANCE AND STORAGE
Allow the product to completely cool before handling or cleaning it.
Ensure the product is in the “O” OFF position and the Power Cord is unplugged from the
electrical outlet before cleaning the product.
•
Always ensure the product’s housing is intact and completely assembled before each use.
•
Do not touch hot surfaces. Always use the handle of the product. Use protective mitts
or gloves to avoid serious burns or other personal injury.
•
Clean the exterior surface of the product by wiping it with a soft, damp cloth.
POWER
4
29
man_EOR2015 ('22) V1.indd 29
man_EOR2015 ('22) V1.indd 29
28-02-2022 14:23
28-02-2022 14:23