Qlightec QLEX-SLM-650-EMG, Быстрый старт

Страница: 4 / 8

ⴙ
ⴘ
"
"
SECTION A-A
③ Fixture ring
⑦ Fixture ring fastening
direction
⑥ Fixture ring loosening
direction
⑤ Rotating arrow
PC tube(PC)
Bracket(STS)
Housing (AI)
Upper cover (AI)
Side cover(Al)
④
Lighting part
Fixing bracket(STS)
Terminal block(Al)
Socket (Al)
4
• First, machine holes on the mounting surface
①
.
• The mounting hole of this product is 8mm in diameter.
• When machining taps, fasten the bolt through the mounting hole of the product.
• When machining holes, insert the bolt through the hole of the product, and tighten the nut from the opposite side of the mounting surface.
• Turn the fixture ring
③
in the loosening direction
⑥
.
• Grab the lighting part
④
and turn rotating arrow in both directions
⑤
to set the place where you want to illuminate.
• Fix the fixture ring
③
in the direction of
⑦
.
* Caution : Do not continuously rotate the lighting part
④
in one direction. It may cause disconnection of wiring on the lighting part.
Parts Definition/ Installation
■
Parts Definition
■ Installation
Installation Environment and Protection Rating
• This product is designed to be explosion proof.
• Please make sure to use the product in an environment that meets the specified explosion proof rating and regulations.
• For further information, please visit our website (www.qlight.com).