Qlight SNE-TI, Руководство пользователя

Страница: 3 / 8

3
Ø152
Ø7
9
4-Ø8 FITTING HOLES
CABLE ENTRY
NPT 1/2''
37
182.5
238
10
0
49
107
78
11
4
114
SNE-TI / SNEL-TI / SNELR-TI / SNE-S-TI
Dimensions
(Units : mm)
①
• First, machine taps or holes on the mounting surface
①
.
• The mounting hole of this product is 8mm in diameter.
• When machining taps, fasten the bolt through the mounting hole of the product.
• When machining holes, insert the bolt through the hole of the product, and tighten the nut from the opposite side of the mounting surface.
■
Installation
Housing(Al)
Terminal cover(Al)
Protection cage
(STS316L)
Lens (Tempered glass)
Parts Definition/ Installation/ Light Function Selection
▶LF :
Flashing
■
Light Function Selection(SNEL only)
• • Please refer to the chart below to use light function
selection switch located inside the product.
• Default function is set at steady LED. Select the desired function
for your application during installation.
▶L :
Steady
■ Parts Definition