Qlight SMP50, Руководство пользователя

Страница: 5 / 12

5
①
POWER
CABLE GLAND
③ ②
①
Terminal for power supply.
②
Terminal for sound channel selection via either external con-
tact or NPN transistor.
③
COM terminal for channel selection via wiring - Please refer
to Page 2 “Wiring Instructions”.
VOL.
MIN. MAX.
No. 1 2 3 4 5
0 0 0 0 0 0
1 1 0 0 0 0
2 0 1 0 0 0
3 0 0 1 0 0
4 0 0 0 1 0
5 0 0 0 0 1
※
Please note that the
switches shown on the
table is to explain how
to wire the terminal block.
Actual products do not
have switches attached.
Terminal box
0 0 0 0 0 0
1 0 0 0 0 1
2 0 0 0 1 0
29 1 1 1 0 1
30 1 1 1 1 0
ON(1)
OFF(0)
CH1 CH3 CH2 CH4 CH5
RWR(+) RWR(-) CH1 CH2 CH3 CH4 CH5 COM
COM EXTERNAL CONTACT
• The volume output of this product is adjustable.
• Turn the volume dial clockwise to increase the volume,
and turn counter clockwise to decrease the volume.
• There will be no sound when the dial is put at MIN.
Volume Adjustment
Rear Control Configuration
Volume Dial
• SD card specifications
- Use standard SD card.
- Mini SD or Micro SD also can be used
with adaptor.
- SD, SDHC type supported
- Storage capacity : Max. 32GB
- Class : No specification
• Please save the MP3 sound file on the SD card as shown
below.
• Create an “MP3_FILE” folder on the SD card and save
the MP3 file in the following file format.
• MP3 file format
• When saving files, please save them in order.
- Please start saving after formatting the SD card.
• The length of the file name must not exceed 40 characters.
23 _ For Elise
.mp3
Filename (Up to 40 characters)
Seperator (Track# and file title)
Track# (01~30)
01_Fire.mp3
02_Emergency.mp3
03_For Elise.mp3
30_Cuckoo's Waltz.mp3
[Example]
SD Card Specifications and
Sound Saving Manual
Bit/ Binary Input Method Using Rear
Terminal Block
• Bit input mode(using external line) allows you to select one
of five sound options by switching on one of the 5 channels
(Ch1 - Ch5).
• Total of 5 sound options are configurable.
■ Wiring through terminal block with either external contact
or NPN transistor allows either bit or binary input method
for sound channel selection.
• Binary input mode(using external line) allows you to receive
multiple inputs by using the 5 channels(Ch1 - Ch5) to
configure one of 30 sound options.
• Total of 30 sound options are configurable.
■ Bit Input Mode
■ Binary Input Mode
Binary input mode
Can select up to
30 sound options
Bit input mode
Can select up to
5 sound options