3
Grounding Instructions
Parts Definition/ Bracket Adjustment
■
Parts Definition
Lens(Tempered glass)
Side cover(Al)
Housing(Al)
Bracket(SPC-1)
Wiring Instructions
•
DC type cable specification :
External power line - Dura & Flex-F VU(0.5sq) x 2C 400mm
•
DC type product can be wired regardless of polarity.
•
Please use an M4 bolt at the location marked in the diagram
above to ground the product.
•
When connecting the grounding cable, please use a ring
terminal.
•
Please use a ring terminal made of C5212 material as it has
the same electrical properties of the conductor.
•
Please use a grounding cable with a diameter greater than Ø4mm.
•
Please make sure to ground the common line(-) of the product.
White
Black
Fuse
Power
M4 ground
contact part
•
In case angle adjustment is needed after installation, please loosen the fixing bolt of two brackets
①
completely and remove them.
•
Securing the bracket bushings
②
using spanner, loosen the bracket fixing nuts
③
slightly and adjust the angle as desired.
•
Once the angle is adjusted as desired, please secure the bracket fixing bolt
①
aligning with guide rail and tighten the bracket fixing nut
③.
■
Bracket Adjustment
①
②
③
DC
VIEW “A”
VIEW “A”
