ETAR50MCL, ETAR50MCL-BZ, ETAR50MCLF, ETAR50MCLF-BZ
※
ETAR50MCL, ETAR50MCL-BZ: Steady
ETAR50MCLF, ETAR50MCLF-BZ : Flashing
ETAR50MCL, ETAR50MCL-BZ, ETAR50MCLF, ETAR50MCLF-BZ
PCD 65
3-Φ6 HOLES
Min.Ø5 CABLE ENTRY
EN - ETAR50MCL - 2305A
Lens(PC)
Bolt
Flange nut
Bracket(Al)
Housing(Al)
Red
Amber
Green
Brown
Black
Red
Amber
Green
Brown
Black
Power
Power
Fuse
Fuse
Red
Amber
Green
Buzzer
Red
Amber
Green
Buzzer
Product Operation Inquiry / Customer S82-51-620-4100
You can expect prompt service if you have exact information such as model name, symptom, telephone number and address.
※
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
www.qlight.com
Mounting Hole Specifications
Installation Environment and Protection Rating
•
This product is designed for indoor use with protection rating of IP20.
• If the product is installed in locations that subject it to excessive dust
or water other than the designated IP protection rating
indicated, it may cause malfunction or damage to the product.
• For further information, please visit our website (www.qlight.com).
• Machine holes on the mounting surface referring to the
diagram below.
• ETAR50MCL series can be wired by using both external contact
and transistor.
•
Wiring to transistor, use the PNP transis- tor. Please wire properly
based on wiring instructions.
• External power/ signal line - UL1007 AWG22(0.3sq) 400mm
• Please disassemble the M4 bolts placed in mounting bolts and
place the bracket on to desired mounting surface.
• Tighten the flange nuts from the opposite side of the mounting
surface
.
Wiring Instructions
Parts Definition/ Installation
External transistor-PNP
External contact
