1.0
Mounting of Rotaqleen with poles
1.1
The Rotaqleen can be moved to left and right with the internal joint by hand. Before you mount
it, you have to pull the splint pin on the joint.
1.2
You have to unroll as much cable as you need from the cable drum of the Rotaqleen.
1.3
Connect the Rotaqleen with the supreme pole and connect it with the Water- and Power
Connection.
Attention!
Be sure that the blue hose for the pure water is connected with the
motor,
danger of overheating!
Secure the cables and hoses with the Velcro tapes on the poles.
Make absolutely sure that the poles are secured by thumbscrews. It´s advisable to settle the
Rotaqleen on the cleaning surface as early as possible, because of the high weight of the
Rotaqleen. Then you could continue to connect the remaining poles.
2.0
Startup operations with the power supply 230/24V
2.1 Put the power plug in the 230 V socket. The white LED lamp lights if the power supply is correct.
2.2 Connect the cable drum of the Rotaqleen with the socket of the Rotaqleen.
2.3 Choose if you want to use the machine with remote control or by hand.
Put the main switch on the wanted running direction of the Rotaqleen. In manual operation the
ROTAQLEEN will start immediately and the power LED lights up green. If you use the remote
control push the Button “I“ on the remote control to start the machine. The Rotaqleen starts to
rotate and the power LED lights up green. To turn the Rotaqleen off, you have to push the Button
“O“ on the remote control.
The Buttons „water“ and „chemistry“ were used to control the Profi-Qleen Machine after the
remote control was registrated on the machine.
3.0
The cleaning process at an open space PV system, for example
3.1 You have to start cleaning on the top of the surface, so that the dirt is always under the
Rotaqleen and can be washed away from the water. With simple hand moves at the pole, you
can turn the Rotaqleen to the left or to the right side
3.2 If the surface is extremely dirty, you might have to move several times over the surface.
