Qleen PURASTART E, Информация пользователя

Страница: 11 / 28

| 11
Starting up
Water can be supplied directly to the house water connection via a Gardena hose or through a tank with the
suction hose.
Caution the device may be damaged:
Only use clean tap water with a maximum inlet pressure of 15 bar for the water supply!
It can otherwise lead to damage to the device.
4.2 Connection of the water supply
Before assembly, check the strainer and the seals in the quick coupling for contamination.
These can reduce the flow rate and lead to a drop in pressure at the nozzles, see
Page 21 (8.4 Cleaning/replacing the strainer at the water inlet)
4.3 Water supply through the house water connection
2. Connect the house water connection by means of Gardena
hose to the input of the QLEEN PURASTART E
3. Open the tap of the house water connection
⇒ The water supply via the house water connection is
established
1. Attach the Gardena adapter to the water inlet and lock it in
place by turning it clockwise.
• Before connecting the tap water, make sure that the shut-off
tap is closed.