Qimova PE-L Скачать руководство пользователя страница 45

Страница: 45 / 48

Qimova chair | User manual

Version 1.10 | Page 45 af 48

•

Reconnect the cable connectors (1 and 2) to the terminal nearest the centre of the

chair. The red cable connector must be placed on the left and the black cable

connector must be placed on the right.

NOTE:

Ensure wires are connected correctly.

To change the fuse:

•

Disconnect the black and red cable connectors from the terminals nearest to the

centre of the chair (1 and 2).

•

Disconnect the cables from the battery terminals (5 and 6). Make sure you do not

touch the opposite terminals while doing so

•

Slightly press on the sides of the black fuse housing to open the box (7)

•

Replace the fuse. Always use BF1-FUSE-LINKS 60A from Pudenz

•

Reconnect the cables to the battery terminals (5 and 6).

•

Reconnect the cable connectors (1 and 2)

10.5

Disposal and recycling

The wheelchair packing material can be disposed of as recyclable material.

The metal parts can be disposed of as recyclable scrap metal.

Electrical parts and printed circuit boards can be disposed of as electrical scrap.

Disposal must take place in accordance with the respective national regulations. Your local

municipal authority will be able to help if you have any questions about disposal.

Содержание PE-L

















































Результаты поиска

Содержание PE-L

Отзывы:

Бренды по названию

Популярные бренды

Qimova PE-L, Руководство пользователя

Результаты поиска

Содержание PE-L

Отзывы:

Бренды по названию

Популярные бренды