UM-PRORUNNER_mk9-2.0-EN
37
Maintenance
6.3
Cleaning
1.
Make sure there are no products on the carrier.
2.
Switch off the machine.
3.
Secure the main power supply switch with a padlock.
4.
Make sure that the mechanical locking device secures the position of the carrier.
5.
Remove deposit and dirt by hand.
6.
Report any damage to the technically responsible person or to Qimarox and make
sure that any damage is remedied before restarting the machine.
WARNING
•
Do not use any corrosive and inflammable solvents or cleaning
agents on the machine that contain TRI, PER, TETRA or FCHC. Read
the instructions on the packaging when use is made of chemical sub-
stances (cleaning agents).
•
Electrical components should not make contact with water or other
liquids.
•
Do not clean the machine with compressed air or water under high
pressure.
•
Avoid parts made of rubber or plastic, such as cables and gaskets,
from making contact with oil, solvents or other chemicals.
