Safety
12
UM Pallet dispenser PD2 v2.0 EN
3.3 Safety instructions
3.3.1 General
Comply with the safety regulations given in this manual. Deviation from these
regulations can lead to unacceptable risks.
Never close doors (if present) in the fenced area of the machine, when a person is
inside this area.
Switch off the machine, secure the main power supply switch in the off position
with a padlock and make sure that the air service unit is switched off to prevent
the machine from being switched on while personnel is working within the fenced
area. After making sure that the machine is completely switched off, it is
necessary to vent all cylinders in order to create a safe environment to work in.
See section 6.2
Comply with all relevant local legislation and regulations.
Always wear the prescribed personal protective equipment when working on the
machine. See section 3.7
Be aware that unexpected movements in automatic mode of the machine can
occur.
Check the correct operation of the safety devices regularly.
Do not set the main switch to the ON position when persons are in contact with
the machine.
Never start the machine if persons are in contact with the machine or are inside
the fenced area.
3.3.2 Set up
Connect the machine in accordance with the local laws and regulations
concerning health and safety.
Before putting the machine into use, check if the machine has been set up in
accordance with the instructions in this manual and with the layout drawing.
Make sure that the system into which the machine is integrated, complies with all
relevant health and safety directives and regulations and that the hazards that
may be present at the transitions between the machine and system or other items,
are sufficiently removed.
3.3.3 Starting the machine
Do not switch the main power supply on when persons are in contact with the
machine.
Do not switch the air service unit on when persons are in contact with the
machine.
Do not start the machine when persons are in contact with the machine.
Do not start the machine when persons are present in the fenced area of the
machine.
Before the machine is put into operation, all machine parts must comply with all
relevant health and safety directives and regulations.
3.3.4 During machine operation
Keep your hands and feet away from danger zones.
Make sure you do not wear loose clothing and secure long or loose hair.
Make sure that no persons or objects are within the range of any moving parts of
the machine.