Qilive Q.6852, Руководство пользователя, Страница: 30 / 272

30
EN
9. TROUBLESHOOTING
9.1. ERROR CODES
If there is a malfunction, the dishwasher displays an error code.
Codes Meaning Possible Causes
E1 Longer inlet time.
Faucets not open, water intake is restricted,
or water pressure is too low.
E3
Not reaching required
temperature.
Malfunction of the heating element.
E4 Overflow. Some element of the dishwasher leaks.
E8
Failure of orientation of
the distributary valve.
Open circuit or a break in the distributary
valve.
Warning:
■ If an overflow occurs, turn off the main water supply before calling for service.
■ If there is water in the base pan because of an overflow or a small leak, remove
the water before restarting the dishwasher.
9.2. BEFORE CALLING FOR SERVICE
Problem Possible Causes What to Do
Dishwasher
doesn’t
start.
Fuse blown or the
circuit breaker is
tripped
Replace the fuse or reset the circuit
breaker. Remove any appliances sharing
the circuit with the dishwasher.
Power supply is not
turned on.
Make sure the dishwasher is turned on and
the door is closed securely. Make sure the
power cord is plugged into the wall socket.
Water pressure is
low.
Check that the water supply is connected
properly and the water is turned on.
The dishwasher
door is not closed
properly.
Make sure to close the door properly and
latch it.
Water not
pumped
from
dishwasher.
Twisted or trapped
drain hose.
Check the drain hose.
Filter clogged. Check the coarse filter.
Kitchen sink clogged.
Check the kitchen sink to make sure it is
draining well. You may need a plumber.