26
EN
Error Display
Cause
Solution
Water injecting problem
during wash cycle.
1.
Check if the water
pressure is high
enough.
2.
Straighten the water
pipe.
3.
Clean the inlet valve
filter.
Overtime water
draining
Check the drain hose for
blockage.
Water overflow
Restart the appliance.
Communication error:
The main control board
and display board
cannot communicate
with each other when
the washing machine is
powered on.
1.
Check whether the
communication wires
between the main
control board and
the display board are
loose.
2.
Check the computer
board.
Water level sensor
error: The frequency
of the water level
sensor is not within the
specified range
1.
Check the water level
sensor.
2.
Check the wiring of
the water level sensor.
3.
Inspect the computer
board.
Inverter board
overcurrent
1.
Change the inverter
motor board.
IPM temperature
sampling error on
inverter board
1.
Change the inverter
motor board.
The speed signal from
the inverter board was
lost or blocked
1.
Place the washing
machine at room
temperature for
two hours and then
enable T12 for self-
calibration.
2.
Change the computer
board.
Overtemperature on
inverter board motor
1.
Place the washing
machine at room
temperature for
two hours and then
enable T12 for self-
calibration.
2.
Change the computer
board.
