Qilive Q.5685, Руководство пользователя

Страница: 9 / 84

9
EN
Descaling procedure:
1. Buy a commercially available descaler for espresso machines and follow the instructions on the package.
2. Empty the water tank. Fill the water tank with the recommended amount of descaler and fill the rest of the
water tank with water up to the “MAX” mark.
3. Place a large container under the group head.
4. Follow the steps 1 – 8 of the PREHEATING section. When you reach step 8, press the Coffee button to
pump 2 cups (about 60 ml/2 oz each) of descaling water. Discard the water from each cup.
5. Next, press the Steam button and wait until the indicator illuminates.
6. Turn the Steam control knob anti-clockwise to make steam for 2 minutes . Then turn the Steam control
knob clockwise to the (OFF) position to stop steaming.
7. Press the Power button to turn OFF the espresso machine. Let the descaling solution sit in the machine
for
15 minutes
.
8. Press the Power button to turn ON the espresso machine.
9. Wait until the Coffee button illuminates, and then press the Coffee button to pump until no descaling water
is left in the water tank. Discard the collected water.
Tap water rinsing procedure:
10. Remove the water tank from the espresso machine. Wash well and fill it with tap water up to the “MAX”
mark. Attach the water tank to the espresso machine.
11. Repeat steps 3 – 5 above 3 times (to pump tap water).
12. Press the Coffee button to pump hot water until the water tank is empty.
13. Your espresso machine is now descaled.
7. TROUBLESHOOTING
Problem Possible cause Solution
The metal parts of the
appliance have rusted.
The descaler used was not suitable
for espresso machines (the
descaler was too strong, causing it
to corrode the metal parts).
Use a commercially available
descaler suitable for espresso
machines.
Water leaks from the bottom
of the coffee maker.
The drip tray is full.
Empty and clean the drip tray
regularly.
The water tank is not properly
installed.
Re-install the water tank.
Malfunction in the appliance.
Unplug the appliance and contact
the closest authorized service
centre to arrange a repair.
Water leaks from the sides
of the filter.
There are coffee grounds around
the rim.
Remove coffee grounds from the
rim before attaching to the filter.
The filter is too full.
Do not fill coffee grounds above the
rim of the filter.
Fill coffee grounds evenly and level
with the rim of the filter, and then
tamp the coffee grounds with the
tamper.
The portafilter is not properly
locked into the group head.
Ensure the portafilter is properly
inserted into the group head in the
UNLOCKED position, and then
turn the handle to the right until it
reaches the LOCKED position.
The coffee tastes sour.
The appliance was not flushed with
a cycle of the Coffee button before
preparing coffee for the first time.
See the section BEFORE
FIRST USE, and follow the flush
procedure. Repeat if necessary.
- The coffee grounds are expired or
have spoiled.
- The coffee grounds have been
stored in a hot, wet place for a long
time.
- Use fresh coffee grounds.
- Store unopened coffee packages
in a cool, dry place.
- After opening a coffee package,
reseal it tightly and store it in the
fridge to maintain its freshness.