Qihan Sanbot S1-B2, Руководство пользователя

Страница: 28 / 42

S1-B2 MANUAL
25
Part Four About Battery Charging
1. Place the Charging Pile
There are two ways to place the charging pile of the robot.
(1) Placing on the ground flat
Let the charging metal sheet of the charging pile outward and lean it against a smooth wall. In order not to disturb the robot when it moves, please place the power wire
along the wall and make sure there is no barriers, wires, cords, etc. within two to three meters around the charging pile. Because when robot receive infrared signal reflection
by other obstacles will lead charging failure.
(2) Placing on the ground flat and wall-mounted
Place the charging pile on the ground. Choose a position with appropriate height on the wall and drive two nails into the wall. Make sure that the distance between the two
nails should be in accord with the distance between the two wall-mounted holes in the charging pile. Raise the charging pile, let the two nails fix the wall-mounted holes and
then put the charging pile on the ground so that the charging pile is fixed to avoid from tottering.
2. Charge Mode
When you use the charging pile for the first time, please open the cover of the adapter box and take the adapter out. Connect the power wire in the packing box with the