Important Note:
●
If you do not plan to use the device for a long time, such as at a vacation, please remove the
battery from Transmitter, then put them in a safe place.
●
Improperly using a battery may cause it to leak and damage nearby items, and can create the
risk of fire and personal injury. Batteries should not be left in an area where the children can
reach them as they may pose a chocking hazard.
●
Recycle used batteries following environmental protection practices.
Transmitter Installation:
●
Stick the Transmitter on the wall or the door with
double-sided adhesive tape.
Receiver Installation:
●
Plug the Receiver into any socket of AC110~240V power.
2
Battery Installation (Transmitter):
●
Open the Transmitter by pushing in the interface located at the bottom with a flat screw driver.
●
Place the CR2032 battery (included).
CR2032 3V
Lithium
Battery
VOL
MODE
