22
∙
Out Arm Active
usually assigned to a inte-
rior area (i.e.: foyer, lobby,or room). Bypassed
automatically when armed in STAY mode. We
recommend setting PIR Motion Detector to
Out Arm Active.
∙
24 Hours Active usually assigned to a zone
containing an Emergency Button, Smoke Sen-
sor, CO, Water Leakage and Gas Sensors.
∙
To used as doorbell, select
Doorbell.
∙
To disable the zone, select
Close.
∙
Use to scroll to , then use digits keypad
to enter the Zone Number (0-89 are available).
The Zone Number should be unique.
∙
Press ,’Synchronizing’ is displayed, the
panel goes into the sniffer mode and count
down the pairing time remaining .
∙
Active wireless sensor to send a transmis-
sion signal to the panel as shown to the right .
∙
Active wireless sensor to send a transmis-
sion signal to the panel as shown to the right .
∙
The system will display ‘Device code has
been learnt’ if serial number of wireless sen-
sor have been learned, and the Zone Name/
Mode/Number will be refreshed.
Separate the sensor from
the magnet by at least 1.0
inches(2.5cm)
Place the PIR motion de-
tector in a high position and
then walk within the detec-
tion area to trigger the PIR
alarm once (the indicator
light flashes once)
Go to
Menu>Parts>Detector>Edit
to edit
Zone Name/Zone Mode
of se-
lected zone specified by the zone number, or delete the selected zone .
Go to
Menu>Parts>Detector>Delete All
to delete all the wireless sensors.