QHY163
С
6
04
Use QHY163M in SharpCap
1. Connect your QHY163C to 12V power supply. Connect your QHY163C to your computer with USB3.0
cable
2. Run SharpCap. If the aforementioned software and drivers all have been installed properly, the video
image will appear automatically and you will see the frame rate at the lower-left corner of the software
as shown below
3. If you have started the SharpCap before connecting camera to your PC. You can click menu-
>cameras->rescan for cameras to search the camera and check on the camera name (QHY163C in this
case).
4.
To make sure the camera can run properly, the software will start the camera at the lowest speed,
which makes the frame rate much lower than the highest frame rate declared on its webpage. Now you
can try to get the most out of it by changing several settings. First you can try to set the exposure time
to 1ms, then try to reduce the "USB traffic" value. For modern computer with i7-4 core, it should get the
max performance. But please note that not all computers can get the best performance due to various
reasons such as the CPU loading, the saving-energy mode setting, the mainboard performance and
USB3.0 port performance. Sometimes the display size may also impede obtaining the best performance.
So you can try to use the "Zoom" function to reduce the display size to see if it helps. Normally speaking
the QHY163C can get more than 15FPS @ full 20mega resolution.
The debayer may take the CPU time and sometimes it will limit the frame rate. You can use the RAW8
mode and select debayer OFF to get faster.
