5
WARNING
– RISK OF FIRE.
SAFETY RULES
•
After removing the packaging, check that the material supplied is intact and complete; if this is not the case, contact
the heating contractor that sold the 3WOOD Boiler.
•
The 3WOOD Boiler must be installed by a licensed heating contractor in compliance with the National, State and
Local codes in force and the instructions provided in the manual supplied with the 3WOOD.
•
The 3WOOD Boiler must be used for the intended purpose. QHT BIASI is not liable for any injury or damages
caused to people, animals or things due to errors in installation, operation, maintenance and improper use of the
boiler.
•
In the event of water leaks, close the water supply and call your Heating Contractor.
•
The manual is an integral part of the 3WOOD and consequently must ALWAYS be kept with the 3WOOD
Boiler when transferred to another owner or user, or installed in another system. The manual must be kept carefully
and if damaged or lost a replacement can be ordered by calling QHT Biasi.(1-800-501-7697)
•
The 3WOOD Boiler is not to be used with an automatic stoker unless so certified.
•
The 3WOOD Boiler must be serviced at least once a year.
•
Caution: Hot surfaces; keep children away. Do not touch during operation.
•
DO NOT
allow the boiler to be controlled by children or incapable persons without supervision.
•
DO NOT
use chemicals or fluids to start the fire.
•
DO NOT
burn garbage, gasoline, naphtha, propane, engine oil, or other flammable materials.
•
DO NOT
fire the
3WOOD
during a power failure. Use a wood stove during a power failure not a wood boiler.
•
DO NOT
dispose of ashes in anything other then a steel container and do not store it in house.
•
DO NOT
let the chimney draft exceed .2 inches of water column
•
DO NOT
adjust or tamper with the chain which connects the Samson draft regulator to the air damper
•
DO NOT
perform any cleaning operations when the boiler is hot or when there are coals inside the boiler.
•
DO NOT
adjust the safety or control devices without consulting with the instructions of the manufacturer of the boiler.
•
DO NOT
plug or reduce the size of the ventilation openings in the room where the boiler is installed and on the boiler
(if present). The ventilation openings are essential for correct combustion.
•
DO NOT
leave containers with flammable substances in the boiler room where the boiler is installed.
•
DO NOT
operate with fuel loading or ash doors open.
•
DO NOT
store fuel or other combustible materials within marked installation clearances.
•
DO NOT
overload the combustion chamber.
NOTE: Inspect and clean chimney flue regularly.
DO NOT connect to any chimney or vent serving another appliance.
NOTE: For Canadian Installations, the boiler must be installed as per the following
Requirements:
•
CAN/CSA-B365 Changes to the installation must comply with CAN/CGA-B149.1
•
Can/CGA-B149.2 (for gas fired), C22.1 (for electric), CSA B139 (for oil fired)
DANGER
WARNING
