TRIMMING INSTRUCTIONS
1.
Walk, never run with the machine, be very careful when trimming uneven/rough ground.
2.
Be careful when changing the direction of the trimmer on a slope.
3.
Do not trim excessively steep slopes.
4.
Best results will be achieved if the foliage is dry. Wet foliage will clog the blades.
5.
Check that all nuts, bolts and screws are well tightened.
6.
Work only when there is enough light.
7.
Turn off the motor and remove the electrical plug from the power source, if you must
leave the hedge trimmer unattended.
8.
Never place your hands and feet between the blades while the motor is running.
9.
Never change in any way the rated speed of the motor.
10.
Never lift or carry the hedge trimmer above working height, while the motor is running.
11.
Stop the motor and remove the electrical cable from the power source in these cases:
-
Before any operation under the guard.
-
Before any maintenance, repairing or checking operations.
-
Before carrying, lifting or removing the line trimmer.
-
If you leave the line trimmer unattended or changing the cutting height.
-
After hitting a foreign object, stop the hedge trimmer and check thoroughly the
machine in order to see if it is damaged. Take the machine to a local Approved
Service Dealer for inspection if necessary. Repairs of this nature are not covered
under the Manufacturer’s warranty.
-
If the hedge trimmer vibrates in an abnormal way, find the reasons why, and take
your hedge trimmer to a local Approved Service Dealer.
CAUTION
Allowing anyone to operate this machine without proper instruction may result in injury.
Wear sturdy, full coverage footwear. Operating this machine with bare feet, or with open toe
shoes or sandals increases your risk of injury.
Do not use the machine at night or in poor light.
Be sure to transport the machine from one place to another with the motor off.
To prevent damage, check the machine for any signs of damage or other faults when
operated.
