QGarden QG40-145SP, Инструкция по эксплуатации

Страница: 6 / 36

GENERAL SAFETY RULES
Before you put the machine into operation, you must read this instruction manual.
When using this machine, observe the following safety instructions to exclude the risk of
personal injury or material damage. Please also observe the special safety instructions in the
respective chapters. Where applicable, follow the legal directives or regulations for the
prevention of accidents in relation to the use of this machine.
WARNING
When using petrol tools, basic safety precautions, should always be followed to reduce the
risk of serious personal injury and/or damage to the unit.
TRAINING
The operator must receive proper training in the use, adjustment and operation of the
machine, including prohibited operations.
1. Read the instructions carefully. Be familiar with the controls & proper use of the
equipment. Spend time to familiarise yourself with your machine before each use.
2. Never allow children or people unfamiliar with these instructions to use the machine.
Local regulations can restrict the operator age.
3. This machine is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the machine by a
person responsible for their safety.
4. Never work while people, especially children, or pets are nearby.
5. The operator or user is responsible for accidents or hazards occurring to other people or
their property.
SAFETY INSTRUCTIONS FOR WORKING WITH YOUR LAWNMOWER
1. Do not leave engines running in enclosed spaces, where dangerous carbon monoxide
could accumulate.
2. Operate in daylight or good artificial lighting. If possible, do not use on overly wet ground.
3. Ensure good stability on slopes. Always operate across the slope, never up and down.
4. Be particularly careful if changing direction of travel on the slope.
5. Do not operate on steep slopes.
6. Operate whilst walking, do not run.
7. Be particularly careful when you turn or when you pull the machine towards you.
8. Stop the engine and blade, if it is to travel across other areas or must be transferred
to/from working area.
9. Never use the machine with damaged safety protection guards.
10. Do not change the engine regulation set up. (This should only be undertaken by a skilled
technician).
11. Carefully start the engine. Keep your feet clear of the blade.
12. Never reach behind or under the rotating parts with hands or feet.
13. Never lift or carry the machine while the engine is on.
14. Switch the engine off and remove the spark plug cap from the spark plug, before
unblocking or removing obstacles from the blade or exit chute:
− Before releasing blockages, inspecting, cleaning or working on the machine.
− After hitting an obstruction. Search for damage on the machine & make repairs as
necessary. If the machine starts vibrating unusually, it should be inspected by an
Approved Service Dealer.