E n g l i s h
|
16
Qfix
|
440 Church Road
|
Avondale, Pennsylvania 19311 USA
|
+1 610-268-0585
|
+1 610-268-0588
|
www.Qfix.com
|
2007856_C
IV. TROUBLESHOOTING
If the oven is damaged, disconnect it from the power outlet.
If the problem persists, contact Qfix at +1 484-720-6054 or [email protected]. Provide
the
product code “Ref” and the oven Serial Number “Ser. No.”.
The product code and serial number
information is provided on the INFORMATION PLATE on the back of the oven.
SPARE PARTS
Use only authorized parts for product repair. Contact Qfix at +1 484-720-6054 or
[email protected] for assistance.
FAILURE
CAUSE
SOLUTION
On START the oven
doesn’t start
The door is open
Check that the door is closed
Microswitch doesn’t
indicate closed door
Contact Qfix. Contact information below.
Oven light OFF
Loose lamp
Correctly fit the lamp into the lamp holder
Blown lamp
Replace the lamp (see Maintenance section)
Non-uniform
heating by the
chamber
The fans fail to invert the
direction of rotation
Contact Qfix. Contact information below.
A fan malfunction
Contact Qfix. Contact information below.
Failure of one of the
resistors
Contact Qfix. Contact information below.
The oven is OFF
Supply voltage failure
Verify power at the power outlet
Incorrect connection to the
power supply
Check connection to the power outlet
Safety thermostat measure
Contact Qfix. Contact information below.
The fan stops while
the oven is on
Safety thermostat motor
Turn off the oven and wait for the motor’s thermal
protection to reset itself.
Motor capacitor failure
Contact Qfix. Contact information below.
Error message
digital ovens:
ER1 or ER2
Component malfunction
Contact Qfix. Contact information below.
