26
– 12|2019 – Subject to change.
Sportrex 2020
Utilisation
Tip!
If the child is too small for the 5-point seatbelts, then we recommend to use
the accessories, such as a hammock, a baby seat or a seat reducer if it is able to
sit upright.
Danger!
Before every journey, check that the safety harnesses and harness catches are
sitting correctly. Failure of the restraining function can result in serious or even
fatal injuries in the event of an accident. Start driving only when all children either
wear a cycling helmet or use a head rest and are properly belted.
Mid sitting position (
Sportrex2
)
To achieve optimum load distribution, it is important for the load’s centre of gravity to be
approximately in the middle of the cabin. In the as-delivered state, the 5-point safety harnesses
are pre-adjusted for carrying two children. If you only want to carry one child, you must adjust the
safety harnesses so that the child can sit in the middle.
»
Pull the straps out of the inner belt buckles.
»
Change round the pads and tongues:
–
Push the pad and the tongue of the inner left
harness onto the right harness.
–
Push the pad and the tongue of the inner right
harness onto the left harness.
»
Secure the belts using the belt buckles:
–
Thread each end of the belt in the buckle as it
is shown in the picture.
–
Be sure to check both belt buckles sit firmly.
»
Put the harness catch, including the pad, onto the
centre harness on the front of the seat. Use the
harness catch of the left or right seat to do this.
»
Repeat this procedure in reverse order whenever
you require the safety harnesses for carrying two
children.
