KidGoo2 – Q9000-S
Subject to change. – 05|2016 –
29
Utilisation
f
Put the harness catch, including the pad, onto the
centre harness on the front of the seat. Use the
harness catch of the left or right seat to do this.
f
Repeat this procedure in reverse order whenever you
require the safety harnesses for carrying two children.
Embarking the child
Preparing the cabin
f
Apply the parking brake to secure the
KidGoo2
in order to prevent it from rolling away.
f
Undo the both front harness fasteners of the cover and fold open the cover completely.
f
Adjust the safety harnesses to the number of children, see
“Adjusting the safety harnesses” on
page 28
.
f
Open the safety harnesses required:
–
Release the harness catch by pressing the pushbutton.
–
Pull the two-part tongue out of the harness catch.
–
Detach the two parts of the tongue and pull the two harnesses apart.
Placing the children
f
Let the children get in one after the other, or lift them into the cabin.
f
If necessary, adjust the head rests and the back pad by securing them to the seats at a
different height with the Velcro strips.
Tip!
A balanced load distribution is particularly important in Trailer mode. If the two
children differ greatly in terms of their weight, you should therefore put the heavier
child in the right-hand seat. Interacting with the tow bar mounted on the left, this
favourably influences handling.
Fastening in a child
f
Help the child to put his/her arms through the two side parts of the 5-point safety harness.
f
Adjust the safety harness, the harnesses pads and the head rests to the size of the child.
