QEP TC620 Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 8

QEP TC620 Скачать руководство пользователя страница 7

Whilst holding the shaft with the spanner wrench,

turn the blade retaining nut clockwise to release

using the hex wrench.
Ensure that the new blade is correctly seated

against the shaft and that the directional arrow

matches that on the blade guard. Replace the

flange and nut, taking care not to overtighten.
Rotate blade to ensure correct alignment.
Replace the blade guard and tighten all parts.

Remove the cover retaining screws and take off

the blade guard.

To empty the water remove the plug at the

bottom of the water tray.

Blade Replacement

Emptying water from tray

Tel: +44 (0) 1253 789180

Tel: +44 (0) 1253 789180

TC620 - 800W Bridge Saw

06

07

Maintenance

• The machine does not require any special

maintenance.

• Regularly remove grindings from the

housing and the covers.

• The unit must not be operated if the mains

connection lead is not in perfect condition.

• Replacement mains connection leads

must not differ from the versions indicated

by the manufacturer Mains connection

cable: (H05 RN-F 3x1.0 mm²).

• Do not operate a defective unit.

• Servicing only by an authorized

after-sales service point.

• Use only for operations for which the unit

is intended.

«
...
5
6
7
8
»

Содержание TC620









Отзывы:

Нет отзывов