QEP 60060, Руководство пользователя

Страница: 10 / 32

- 10 -
DESCRIPTION No.
Fr ont Saw Stand 1-1
Side Saw Stand 1-2
Wheel / Brake Assembly (w/4 bolts, washers, nuts) 2
Stand Knobs (2) 3
Frame Assembly 4
Roller Guide Bar (w/2 bolts, washers, nuts) 5
Water Tray Assembly 6
Drain Plug 7
Angle Bar on Water Tray (w/2 bolts, washers, nuts) 8
Water Tray Brackets for Lock (set of 2 w/screws) 9
Water Pump 10
Water Valve 11
Water Pump Tubing 12
Water Flow “T” 13-1
Water Flow “L” 13-2
“U”-shaped Roller Set 14
Cutting Table 15
Rubber Mat for Cutting Table 16
Ruler Guide (w/4 bolts) 17-1
Ruler Guide Sticker 17-2
L-shaped Supporter (w/2 bolts, washers) 18
Angle Bar Rollers Set 19
Rear Support Post (w/bolt, washers, nuts, 1 hex) 20
Mounting Plate Adjustment (w/nut & lock washer) 21
Motor Support Shaft (w/bolt & washer) 22
Mounting Plate 23
Motor Adjustment Clip (w/bolt & washer) 24
Bearing Housing 25
Blade Shaft Lock Pin 26
Inner Flange 27
Outer Flange 28
Blade Lock Nut 29
Blade Guard 30
Blade Guard Bolt 31
Blade Guard Adjustment Knob 32
Belt Guard Bracket 33
Belt Guard 34
Blade Shaft Lock 35
Power Switch 36
Circuit Breaker 37-1
Waterproof Cover for Circuit Breaker 37-2
Power Switch Housing 38
Power Cord 39
Motor 40
Pulley 41-1
Belt 41-2
Single Socket 42
Splash Guard Flap 43
10" Continuous-Rim Diamond Blade 44
Rubber Mat for Front Extension Table 45
Front Extension Table 46
Rubber Mat for Side Extension Table 47
Side Extension Table 48
Miter Block 49
45°, 90° Rip Guide 50
Saw Stand w/Wheels 51
Universal Wrench 52
Specifications
Motor: 115V -60Hz
2HP
Amps: 16
RPM: 3450 (single speed)
Weight: 118 lbs (54 Kg)
Blade: 10" (250mm)
Arbor: 5/8" (16mm)
Depth of Cut: 3
1
⁄
2
"
Length of Cut: 20" square
14" diagonal
P ARTS LIST