QEP 22500Q, Руководство пользователя

Страница: 11 / 36

– 9 –
5. DO NOT force the material into the blade. let
the blade cut at its own speed.
6. DO NOT cut material not recommended by
the blade manufacturer.
TROUBLESHOOTING
OVerHeatinG OF SaW:
1. Turn saw off and let it rest until motor is cool
to the touch.
2. Check and clean the ventilation slots,
removing blockage and dirt.
tHe SaW dOeS nOt Start:
1. Check that power cord is properly
plugged in.
2. No power from outlet.
3. Switch is damaged.
PARTS LIST
See exploded parts diagram on page 10.
PART # DESCRIPTION
22500-1
Blade Guard Set (w/ Screw,
Wing Nut, Washer & Guard
Support)
22500-2
Miter Guide Set (w/
Adjustment Knob & Hex Nut)
22500-3
Rip Guide
22500-4 left Cutting Table
22500-5 Right Cutting Table
22500-6
Upper Frame
22500-7 Blade lock Nut
22500-8
Outer Flange
6-7003Q (9)
7 in Continuous Rim Blade
22500-10 Inner Flange
22500-11
Oil Seal for Motor
22500-12 Motor (w/5 Screws)
22500-13 Capacitor (w/Screw)
22500-14
Main Frame (w/6 Screws)
22500-15
Waterproof Switch (w/
Waterproof Rubber Cover)
22500-16 Carrying Handle
22500-17 Rubber Base (4)
22500-18
Power Cord
22500-19 Strain Relief Bushing
22500-20
Power Cord Shelter
22500-21
Universal Wrench