Tap again the SLATE106 device to wake it up and complete the SLATE pairing.
☛
To activate a PIN code for the application Slate Overlay Message, execute the
APPLI.HTA
from the SLATE106 device, and set the value
by pin code
for the
parameter
WPAN2 authentication pincode
.
◬
In case a PIN code is required, and a wrong PIN code is entered 3 times, the
Slate Message Overlay
application can not work anymore for the SLATE106 device. To
work around, connect the SLATE106 device to you computer and remove the
PINCODE
file to reset the PIN code.
◬
At the end of the pairing, in case the message
Connection to SLATE failed
appears at the bottom of the mobile screen, despite of a right pin code entered, contact
Interface description
Once the SLATE106 device is paired, the application shows:
: A button
Send the message
to send the message value to the selected SLATE106 device
: A button
Delete
: A label showing dynamically the character length of the message
: A input to enter the message value
: A parameter Display until
Date
: Display until this
Time
The
Date
and
Time
parameters are defining the Date and the time when the text of the
Message Overlay
will be cleared on the SLATE106 device. By default, the
Date
and
Time
are set to clear the message at the end of the current day.
Message sending
Enter your text in the input
(max. 144 characters), and press on the button
Send the message
. The message
Sending ...
appears for a while on the mobile device.
1
2
3
4
5
6
46
Содержание SLATE Series
