Qeedji SBL10e m365 room, Руководство пользователя

Страница: 39 / 58

39
6.2 Appendix: Qether
In case an application can not be executed, the SBL10e returns to a
Recovery
mode, waiting for firmare update.
The provided
Qether
tool allows to make some remote operations on the SBL10e, based on its device MAC address like:
SBL10e device firmware upgrade,
SBL10e device configuration update,
SBL10e device reboot.
The
<product_type>
is an extract of the device PSN value. For example, the 0132x-xxxx
PSN
value leads to the 0132
<product_type>
.
The
<SBL10e_device_MAC_address>
is the MAC address of the device with the format
00:1C:E6:AB:CD:EF
.
◬
The MAC address of the device is written on the label stuck at the back of the SBL10e device with the format
00-1C-E6-AB-CD-EF
.
Discover command example
This command allows to find out the SBL10e devices available on the local network:
qether.exe FF 0132 discover
Configuration command syntax
Send a
.js
configuration script and apply it (default parameters):
qether.exe <SBL10e_device_MAC_address> <product_type> configure -f configuration.js
☛ When using
Qether
, no specific filename pattern is required for the
.js
configuration script, except the
`.js
file extension.
☛ The
system.httpd.username
preference value is limited to 15 characters max. The
system.httpd.password
preference value is limited to 100
characters max. The alphanumeric characters and the following characters
{}|~[]!#_$&()/;<=@|^%?+~((),'
are supported for the
system.httpd.username
and
system.httpd.password
preference values.
☛ The
system.hostname
preference value is limited to 15 characters max. The alphanumeric characters, the character
-
and the character
.
are
supported for the
system.hostname
preference value.
☛ To get an IP address with the DHCP server, set
system.lan1.ipv4.static-addr
with the value
false
. Else to work with a static IP address, set
system.lan1.ipv4.static-addr
with the value
true
.
Reboot command syntax
Reboot the target device:
qether.exe <SBL10e_device_MAC_address> <product_type> reboot
Firmware upgrade command syntax
Send a firmware file, with default transfer parameters, and install it. For example:
qether.exe <SBL10e_device_MAC_address> <product_type> install -f bm0032_m365_room-sbl10e-setup-1.11.11.bin
☛ Qether needs first to be installed first on your MS-Windows computer. For further information, refer to the Qether user manual .