![background image](http://html1.mh-extra.com/html/qeedji/sap10e/sap10e_user-manual_3137624036.webp)
36
Date and time
The system date and time can only be set and updated thanks to a NTP server¹. In this case, you have to:
First:
define the timezone value,
define the NTP server IP address,
check that the NTP time server is activated (activated by default).
Secondly:
define the gateway URL to access to internet,
define valid primary and secondary DNS servers.
For further information, refer to the chapter
§
,
§
§
,
☛
In case the SAP10e device can not fetch a valid date and time through NTP at device boot-up, the clock does not progress and stays with the
value
01/01/2020 00:00
. The date and time metadata of the files added after this date on the file system is also
01/01/2020 00:00
until they are
modified. The last modification date for a file can be only be seen with a WebDAV client.
☛
When the server NTP is activated and the device is properly configured, the date and time for the SAP10e device is updated automatically by
NTP at the device boot-up. Then it is progressing every seconds.
☛
The support for date and time file metadata display in this pane will be available in a next version.
☛
When the system date and time value is
01/01/2020 00:00
, it cannot be transmitted to the SLATEs devices as valid date and time.
1
3
Содержание SAP10e
