QED LANDTEC i-Q Series, Руководство по эксплуатации, Страница: 7 / 51

Operation Manual
GEM and GEM PRO
OMiQGEM-L Issue.02
Page 7 of 51
WARNINGS
The following warnings are for this equipment's setup, use, maintenance, and repair. The exclamation point
symbol alerts you to a general warning and the hazard symbols refer to procedure-specific risks. When these
symbols appear in the body of this manual or on warning labels, refer back to these Warnings. Product-specific
hazard symbols and warnings not covered in this section may appear throughout the body of this manual where
applicable.
Failure to follow the correct information may result in physical injury which in some cases could be fatal. If the
equipment is used in a manner not specified by the manufacturer, the protection provided by the equipment
may be impaired.
WARNING
FIRE AND EXPLOSION HAZARD
The work area's flammable gases, such as methane, can ignite or explode. To help prevent fire
and explosion:
•
Use equipment only in well-ventilated areas.
•
Eliminate all ignition sources; such as pilot lights or cigarettes.
•
Do not open the equipment in an explosive atmosphere.
•
Where hazardous gases are being used, the gas exhausted from the instrument must be
piped to an area where it is safe to discharge the gas.
•
It is the responsibility of the operator to determine the protection concept and classification
of equipment required for a particular application and whether these gases create a
potentially explosive atmosphere.
•
Do not attempt to charge non-rechargeable batteries.
Static charge may build up on plastic parts during cleaning and could discharge and ignite
flammable gases. To help prevent fire and explosion:
•
Do not clean with a dry cloth.