QED LANDTEC i-Q Series, Руководство по эксплуатации, Страница: 15 / 51

Operation Manual
GEM and GEM PRO
OMiQGEM-L Issue.02
Page 15 of 51
BATTERY AND CHARGER
To prevent fire and explosion:
•
Do not charge or open in a hazardous or potentially explosive area.
•
Battery Pack QED PMMPB is only for use with i-Q Series.
•
Do not attempt to charge non-rechargeable batteries, for example, the Affinity batteries.
Power Supply Description
Battery Type Rechargeable nickel metal hydride battery pack (user replaceable)
Battery Life Typical use 10 hours from fully charged
Battery charger Separate intelligent 3A battery charger powered from the mains supply (100-
240VAC)
Charger connector type 2-pin ODU
Charge time Approximately 4 hours from complete discharge
Charging mode Connected to the instrument, or standalone
•
The PMMPB batteries used are nickel metal hydride and manufactured as a user-replaceable pack
containing six individual cells and a PCB.
•
The i-Q Series is supplied with a rechargeable battery pack (QED part number PMMPB). Charging of the
battery pack can be undertaken while the battery is fitted or removed from the instrument. To charge the
battery pack, QED charger iQ-3.9 must be used and charging must be in a safe area.
•
Charge only with QED Charger part number iQ-3.9.
•
A full charge will take approximately 4-hours.
To charge the battery pack, align the red dot on the charger plug with the red dot on the battery pack socket
and plug in until you feel and hear the click of the latching mechanism
– see annotation in Figure 4 .
Figure 4 – Charger connection
Note: If the PMMPB battery is removed, the backup coin cell will maintain time/date settings and CO (H
2
compensated) cell conditioning for approximately 10 minutes. After this time, the user will have to reset the time
& date and CO (H
2
compensated) cell conditioning will be affected, meaning the user may need to allow the cell
to stabilize for 24 hours before use.