Manual for Synactix 1E
SpeedEasy Quick Setup
Procedures :
1. Correctly insert the Intel® Pentium III FC-PGA, Celeron FC-PGA and Celeron PPGA
370 processors.
2. Plug in other configurations and restore the system.
3.
Switch on power to the system and press the <Del> key to enter BIOS Setup.
4. Enter “CPU SpeedEasy Setup” menu to set up the CPU speed.
Note: If you do not set the CPU speed, your system will run at the default
setting (400MHz processor with 133MHz host bus speed, 300MHz
for processor with 100MHz host bus speed, 200MHz for processor
with 66MHz host bus speed, for bus ratio locked processor, run its
real speed.
5. Save and exit BIOS Setup, your system will now boot successfully.
S.1
SynactiX 1E
