Manual for SynactiX 1
Expansion Slots & I/O Ports description
Slot / Port
Description
PCI 1
First PCI slot.
PCI 2
Second PCI slot.
IDE 1
Primary IDE port. (Blue)
IDE 2
Secondary IDE port. (White)
AMR
AMR slot.
AGP
AGP slot.
FLOPPY
Floppy Drive Port.
Jumper Settings
Jumpers are located on the mainboard, they represent, clear CMOS jumper JCC, enable
keyboard password power-on function jumper JKB, and enable/disable onboard audio
jumper JSD etc. Pin 1 for all jumpers are located on the side with a thick white line ( Pin1
→
), referring to the mainboard’s silkscreen. Jumpers with three pins will be
shown as to represent pin1 & pin2 connected and to represent pin2
& pin3 connected. For default jumper settings, please refer to the following table:
JFS0
1-2 (Auto)
JFS1
1-2 (Auto)
JCC
2-3 (Normal Status)
JSD
2-3 (Enable Audio)
JSB
Closed (Connect PCI 3.3Vsb) (Optional)
JKB
1-2 (Enable KB Power-on)
JP26&JP27,
1-2 (Back Panel USB Enabled)
JP35&JP36
2-3 (Front Panel USB Enabled)
JFUSB/JUSB
1-2 (Enable Front/Back Panel USB Device Wake-up Function)
JAV
Open (Enable Flash BIOS)
chapter 2
AMR Interface Connector
