Manual for SynactiX 1
chapter 2
Hard Disk LED Connector (HD_LED)
The connector connects to the case’s IDE indicator LED indicating the activity status of IDE
hard disk. The connector has an orientation. If one way doesn’t work, try the other way.
Reset Switch (RESET)
The connector connects to the case’s reset switch. Press the switch once, the system
resets.
Speaker Connector (SPEAKER)
The connector can be connected to the speaker on the case.
Power LED Connector (PWR LED)
The power LED has four status. When the system is in power up status, the LED is on.
When the system is in suspend status, the LED is blink. When the system is in Suspend to
RAM, the LED is off. When the system is in Soft-Off status, the LED is off.The connector has
an orientation.
ACPI LED Connector (ACPI LED)(Reserved)
The ACPI LED is a double-color light with three pins. Pin1&Pin2 drive different color lights. If
Pin1 drives the orange light , Pin2 drives the green light, the following status will come out.
When the system is in power up status, the LED is green on. When the system is in suspend
status, the LED is green blink. When the system is in Suspend to RAM status, the LED is
orange on. When the system is in soft-off status, the LED is off.
GREEN LED Connector (GREEN LED)
The GREEN LED has four status. When the system is in three status (including power up,
suspend, soft-off), the LED is off. When the system is in suspend to RAM status, the LED
is on.
Hardware Green Connector (SLEEP SW)
Push once the switch connected to this header, the system enters suspend mode.
Key Lock Connector (KEYLK)
The connector can be connected to the keyboard lock switch on the case for locking the
keyboard.
POWER
SW
SLEEP
SW
SPEAKER
RESET
GREEN LED
KEYLK
PWR LED
ACPI LED
HD_LED
SPEAKER
RESET
GREEN LED
KEYLK
ACPI LED
POWER
SW
SLEEP
PWR LED
HDD LED(+)
HDD LED(-)
ORANGE(-)
GREEN(-)
LED+(VCC)
POWER
GND
EMPTY
EMPTY
SLEEP
GND
LED+
LED+
LED-
KEYLOCK
GND
LED-
LED-
LED+
EMPTY
GND
RESET
SPKDATA
NC
GND
VCC
