QDI Superb 4LE Series, Руководство пользователя

Страница: 19 / 59

Chapter 2 Chapter 2 Chapter 2 Chapter 2 Chapter 2
Superb 4LE Superb 4LE
Superb 4LE Superb 4LE
Superb 4LE
11
Wake-Up On LAN (WOL)
(Only for extend PCI LAN adapter supports the WOL function. On-board Lan
need not connect to the connector)
Through the Wake-Up On LAN function, a wake event occurring from the net-
work can wake up the system. If this function is to be used, please be sure an
ATX12V power supply of which 5VSB line is capable of delivering current at
least720mA, and a LAN adapter which supports this function is used. Then
connect this header to the relevant connector on the LAN adapter, set “Ring
power up control” as Enabled under the sub-section “PM Wake Up Events” in
the “POWER MANAGEMENT SETUP” section of the CMOS SETUP. Save
and exit, then boot the operating system once to make sure this function
takes effect.
Infrared Header (IrDA)
This connector supports wireless transmitting and receiving device. Before using
this function, configure the settings for IR Address, IR Mode and IR IRQ from
the “INTEGRATED PERIPHERALS” section of the CMOS SETUP.
Signal for waking up
+5V standby
GND
WOL
1
IrDA
VCC
IRRX
GND
IRTX
NC
1