Manual for P6I440BX/BV
On-board IDE
Supports two PCI PIO and bus Master IDE ports.
Supports up to Mode 4 Timing
Supports 2 Fast IDE interfaces for up to 4 IDE devices including IDE hard disks and
CD ROM drives.
Supports “Ultra DMA/33” Synchronous DMA mode transferring up to 33 Mbytes/sec.
Integrated 16x32bit buffer for IDE PCI Burst Transfers.
On-board I/O
Uses Winbond W83977EF super I/O chip.
One floppy port supporting up to two 3.5” or 5.25” floppy drives with
360K/720K/1.2M/1.44M/2.88M format.
Two high speed 16550 fast compatible UARTs(COM1/COM2/COM3/COM4
selective) with 16-byte send/receive FIFOs , supporting MIDI mode.
One enabled parallel port at the I/O address 378H/278H/3BCH with additional
bi-direction I/O capability and multi-mode as SPP/EPP/ECP (IEEE 1284 compliant).
Circuit protection provided, preventing damage to the parallel port when a
connected printer is powered up or operates at a higher voltage.
Supports LS-120 floppy disk drive.
All I/O ports can be enabled/disabled in the BIOS setup.
On-board Audio
Based on the Creative ViBRA™ 16XV CT2511 sound chip.
Compatible with Sound Blaster™, Sound Blaster Pro™ and Windows Sound
System™.
Integrated CQM™ Music Synthesizer.
Stereo Enhancement Support.
Provides on-board Line-in Jack, Microphone-in Jack, speaker/Line-out Jack and MIDI/
Joystick Connector.
Advanced features
Provides Trend ChipAwayVirus® On Guard.
Provides on-board PS/2 mouse and PS/2 keyboard ports.
Two USB ports supported.
Provides infrared interface.
Supports Windows 95/98 software power-down.
Introduction
16
