Manual for P6I440BX/BV
Chapter 2
Installation Instructions
Chapter 2
Installation Instructions
This section covers External Connectors, Jumper Settings, and Memory Configuration.
Refer to the motherboard layout chart for locations of all the jumpers, external connec-
tors, slots and I/O ports. Furthermore, this section lists all necessary connector pins
assignment for your reference. The particular state of the jumpers, connectors and ports
are illustrated in the following figures. Before setting the jumpers or inserting these
connectors, please pay attention to the directions.
External Connectors
PS/2 Keyboard Connector, PS/2 Mouse Connector
PS/2 keyboard connector is for the usage of PS/2 keyboard. If you choose to use a
standard AT size keyboard, an adapter should be used to fit this connector. PS/2 mouse
connector is for the usage of PS/2 mouse.
USB1, USB2
Two USB ports are available for connecting USB devices.
Parallel Port Connector and Serial Port Connector (UART1, UART2)
The parallel port connector can be connected to a parallel device such as a printer, while
the serial port connectors can be connected to serial port devices such as a serial port
mouse. You can enable/disable them and choose the IRQ or I/O address in “Integrated
Peripherals” from AWARD BIOS SETUP.
PS/2 Mouse Connector
PS/2 Keyboard Connector
USB1
USB2
Parallel Port
UART2
UART1
chapter 2
19
