QDI P5I430TX Titanium IB+, Руководство пользователя

Страница: 30 / 57

Connector Configuration
2 -
6
If using DIMM or SIMM only, you can install the DIMM and SIMM as shown
in the following table.
Total Memory SIMM1&2 SIMM3&4 DIMM1 DIMM2
8MB 4MB x 2 ---- ---- ----
---- ---- 8MB ----
16MB 8MB x 2 ---- ---- ----
4MB x 2 4MB x 2 ---- ----
---- ---- 16MB ----
---- ---- 8MB 8MB
24MB 8MB x 2 4MB x 2 ---- ----
32MB 8MB x 2 8MB x 2 ---- ----
16MB x 2 ---- ---- ----
---- ---- 16MB 16MB
---- ---- 32MB ----
48MB 16MB x 2 8MB x 2 ---- ----
---- ---- 32MB 16MB
64MB 16MB x 2 16MB x 2 ---- ----
32MB x 2 ---- ---- ----
---- ---- 32MB 32MB
72MB 32MB x 2 4MB x 2 ---- ----
80MB 32MB x 2 8MB x 2 ---- ----
96MB 32MB x 2 16MB x 2 ---- ----
128MB 32MB x 2 32MB x 2 ---- ----
128MB ----- ----- 64MB 64MB
256MB 64MB x 2 64MB x 2 ---- ----
Illustration of Connectors on board
Remark
1. If DIMM1 and/or DIMM2 has 64MB or 128MB with 64bit SDRAM cells,
SIMM1, 2, 3, 4 must be empty.
2. DRAM and SDRAM modules can be installed in a variety of configurations.
Please note not all possible combinations of installation are list here.