Manual for P2S series
Introduction:
RecoveryEasy, the latest QDI innovation, is able to protect the system from being
destroyed, by creating a so-called “mirror partition” for a current hard disk parti-
tion and backuping all the data to the mirror area. This ideal utility provides disk
partition, disk data backup/recovery, CMOS settings backup/recovery and multi-
boot functions. RecoveryEasy is also able to prevent the system from being at-
tacked by different kinds of boot virus or other severe virus such as CIH. In case
the system is ruined either by mistake or virus, the system can be recovered from
the mirror partition. It applies the build-in BIOS technology that does not occupy
either the hard disk space or the system memory. It’s the best choice for both
corporations and PC users.
Operation Process:
There are two hotkeys – Ctrl+Bksp and F12 for RecoveryEasy to enter “Partition”
and “Recovery” user interfaces accordingly during BIOS booting up. If two or more
hard disks are installed, use F5 key to choose the hard disk.
1.
Partition Interface (see figure-1)
Users can create and delete partitions/mirror partitions, activate partitions, and
uninstall RecoveryEasy in Partition User Interface.
1.1
Install RecoveryEasy for the first time
a. The utility checks the previous disk partition at first, and displays the status
of the first four partitions. If there are more than four disk partitions, users
will be asked to delete the redundant disk partitions, since only four parti-
tions that can be activated are allowed to exist. However, if there’re only four
or fewer partitions, users can follow the system prompt and choose to install
RecoveryEasy based on the previous disk partitions. In this way, the original
extension partitions will be changed to normal ones, and probably the se-
quence of the partitions will be changed also, but the contents contained in
each partition will remain the same.
RecoveryEasy
figure-1 Partition Interface
Appendix
δÃüÃû-2
02-2-19, 11:00
53
