QDI Legend-III P6I440LX/AV, Руководство пользователя, Страница: 55 / 75

Chapter 4
4- 1
Chapter 4
VGA and TV-out Description
ATI's 3D Rage Pro® AGP graphics system with TV-out function is available
on motherboard. They are the most advanced on the market today.
Connect your monitor cable and video cable (if you need TV-out) to their
sockets on motherboard respectively before power-on. If video cable is not
connected when power-on, video signal is not available so as to enhance VGA
performance. Video signal could be PAL or NTSC mode. You should set up
the right mode in Integrated Peripherals of BIOS SETUP with
correspondent to your television system. Video effort is best in 640 x 480
resolution.
If you are using other VGA cards’ drivers that are not 640 x 480 x 16 mode
and an operating system that is not Windows 95, you may encounter conflicts
with the motherboard. It is recommended that you first reconfigure your
operating system to use a VGA driver supplied with your operating system.
For more information about changing your operating system configuration,
please refer to your operating system documentation accordingly.
Note: If you don’t want to use our on-board Rage Pro® AGP
graphics system but an additional add-on VGA card, you'd better
close JP20(Pin1-2) with a jumper cap.
IDE1 (PRIMARY)
IDE2 (SECONDARY)
JP20
DIMM1
DIMM2
DIMM3
DIMM4
Preparing your computer
C-Video socket S-Video socket
VGA Connector