QDI Legend-III P6I440LX/AV, Руководство пользователя, Страница: 48 / 75

AWARD BIOS Description
3- 16
Figure-8 Integrated Peripherals Menu
The following pages tell you the options of each item and describe the
meaning of each option.
Item Option Description
•
IDE HDD Block
Mode
Enabled Allow IDE HDD read/write several sectors
one time.
Disabled IDE HDD only reads/writes a sector for one
time.
•
IDE
Primary/Secondary
Master/Slave PIO
(UDMA) Mode 0 - 4
Auto
Define the IDE primary/secondary master/
slave PIO mode.
The IDE PIO mode is defined according to
auto - detect.
•
On-chip
Primary/Secondary
PCI IDE
Enabled
Disabled
On-chip primary/secondary PCI IDE port is
enabled.
On-chip primary/secondary PCI IDE port is
disabled.
•
USB Keyboard
Support
Enabled
Disabled USB Keyboard Support enabled.
USB Keyboard Support disabled.
•
Onboard FDC
Controller Enabled
Onboard floppy disk controller is enabled.
Disabled
Onboard floppy disk controller is disabled.
•
Onboard Serial Port
1/2 3F8/IRQ4,
2F8/IRQ3, Define onboard serial port address and
required interrupt number.
3E8/IRQ4,
2E8/IRQ3,
Disabled,
Onboard serial port is disabled.
Auto
Set address and interrupt number
automatically.
•
Serial Port 2 Mode Standard, Define Serial Port 2 as standard serial port
Sharp IR,
This mode provides bi-directional
communication by transmitting and receiving
infrared radiation. In this mode, infrared I/O
circuits receive the serial UART output signal.
The rate of the signal is 38.4K Baud in half-
duplex, and it uses normal UART serial data
formats with physical ASKIR modulation.
IrDA SIR The system function is the same as in
Sharp-IR mode, but at 115.2K Baud.
•
Onboard Parallel
Port
378/IRQ7,
278/IRQ5, Define onboard parallel port address and
IRQ channel.
•
Parallel Port Mode SPP
Define the parallel port mode as