Installation Instructions
K8VM800
14
Jumper Settings
Jumpers are located on the mainboard, the clear CMOS jumper JCC, enable keyboard
password power-on function jumper JKB etc. Pin 1 for all jumpers are located on the side
with a thick white line (Pin1
→
), referring to the mainboard’
s silkscreen. Jumpers
with three pins will be shown as
to represent pin1 & pin2 (“1-2”) closed and
to represent pin2 & pin3 (“2-3”) closed.
Jumper Symbol Description Represent
1-2
set pin1 and pin2 closed
2-3
set pin2 and pin3 closed
close set the pins closed
open set the pins opened
Clear CMOS (JCC)
If you want to clear CMOS, unplug the AC power supply first, close JCC (pin3 & pin2)
once, set JCC back to the normal status with pin2 & pin1 connected, then power on the
system.
JCC
1
Normal status
(Unplug the AC
power supply)
1
3
2
3
2
