Installation Instructions
K8VM800
8
Power LED Connector (PWR_LED)
The system provides different states according to front panel mounted LED.
a single-color power LED:
When the system is in S0 status, the LED is on. When the system is in S1,S3, S5 status,
the LED is off. The connector has an orientation.
a dual-color power LED:
Pin2 and Pin4 drive different color lights. When the system is in S0 status, the LED is green
on. When the system is in S1 or S3 status, the LED is yellow. When the system is in S5
status, the LED is off.
Fan Connectors (CPUFAN, CHSFAN)
The fan speed of these three fans can be detected and viewed in “PC Health” section of
the CMOS SETUP.
HDD LED
POWER
LED
Power
SW
RESET
SW
reserv e
POWER LED
HDD LED
HDD LED(+)
HDD LED(-)
G N D
P O W E R
R E S E R V E
EMPTY
G N D
P O W E R
PWR LED(+)
RESET SW
PWR LED(-)
POWER SW
CHSFAN
CPUFAN
+12V
GND
SENSE
+12V
SENSE
GND
