QDI K7VM400M Pro Series, Руководство пользователя

Страница: 19 / 62

11
K7VM400M K7VM400M K7VM400M K7VM400M K7VM400M
Chapter 2 Chapter 2
Chapter 2 Chapter 2 Chapter 2
Wake-Up On LAN (WOL1)(available on -L mainboard)
Through the Wake-Up On LAN function, a wake event occurring from the network can wake up
the system. If this function is to be used, please be sure an ATX power supply and a LAN
adapter which supports this function are used. Then connect this header to the relevant con-
nector on the LAN adapter, set “Power on by Ring/LAN” as Enabled in the “POWER MAN-
AGEMENT SETUP” section of the CMOS SETUP. Save and exit, then boot the operating
system once to make sure this function takes effect.
Wake-Up On Internal Modem (WOM1)(optional)
Through this function, the system which is in the suspend or soft-off status can be waked up by
a ring signal received from the internal modem. When this function is used, be sure an internal
modem card which supports this function is used. Then connect this header to the relevant
connector on the modem card, set “Power on by Ring/LAN” as Enabled in the “Power Manage-
ment Setup” section of the CMOS SETUP. Save and exit, then boot the operating system once
to make sure this function takes effect.
Signal for waking up
WOL1
+5V standby
GND
1
Signal for waking up(active low)
WOM1
GND
1