Manual for Advance 10TM
2.2
RE-CVR PAR
Function : Recovers the content from the mirror area to the relate partition.
Limitation : If users didn’t backup any partitions before, this button is disabled.
Steps:
a. Use F5 key to choose the backuped partition.
b. The time when the latest backup was done will be displayed in the status line. After
confirming the warning message, the system performs the content recovery. By
pressing “N” or “ESC” key, the system quits.
Note:
a. During the process of partition backup or recovery, a guage will be shown as below,
the backup or recovery speed is about 4-5Mbyte/s. See figure-4.
b. If a disk I/O error occurs during the process of partition backup or recovery, this
means there’s physical damage on the hard disk, however users can ignore it and
continue the process.
2.3
ATTRIB PAR
Function : Allows users to modify the properties of the partition (eg. FAT16 -> FAT32)
after entering OS.
Limitation : None.
Steps
: After pressing this button, turn on/off the switch.
Note:
a. The switch resets to the default setting “disable” every time the system reboots.
b. In order to implement this function, users need to enable the switch when installing the
OS or modifying the partition properties. Please note: Do not create or delete partitions or
change the partition size when modifying the partition properties.
figure-4 Backup Partition
RecoveryEasy
